Temperature input modules

The temperature input modules can be used to connect up to eight intrinsically safe temperature sensors to the IS1+ remote I/O system.
Each channel can be used as an input for two-, three- and four-wire Pt, Ni and Cu resistance temperature detectors or as earthed/insulated thermocouples in accordance with DIN, IEC and GOST standards.
For thermocouples, the reference junction temperature is either compensated internally or by means of an external reference junction.
Resistance transmitters, mV sensors and, in the "Four-channel fast" operating mode, joysticks, are also supported with a very short signal delay.

A blue LED and diagnostic messages provide early warnings that maintenance is required in order to avoid system downtime.
The Zone 1 and Class I Div.1 versions have additional LEDs for each channel to indicate any line faults.